|
|
Polyurethane rubber for mould making |Molding polyurethane 40(80) is a cold-cure two-component polyurethane system. Due to its both low viscosity and shrinkage loss, Molding polyurethane 40(80) is easily casted and repro Visit Polyurethane for producing molds | Molding polyurethane | Silicone pro (http://silikony-sk.sk/en/polyurethane)
|
Top Keywords: polyurethane, molding, molding polyurethane, polyurethane 40, polyurethane 40 80, 40 80, silicone, 80, component, 40, molds, cure, sk, viscosity, rubber, for mould, for producing, mould making, shrinkage, mould, producing, two component polyurethane, due to its, polyurethane system, polyurethane rubber, component polyurethane, two component, low viscosity, is easily, rubber for, a cold, casted, a, cold, to its, polyurethane for, Theres a total of 342 keywords.
Inbound and Outbound LinksThere is currently no known inbound links. There is currently no known outbound links. |
Statistics
We first found this page on 2024-01-14 22:34:01 +0000. It was last re-indexed on 2024-09-30 19:09:54 +0000 and with a fetch interval of 90 days it will be fetched again in 7 days on 2024-12-29 or soon thereafter.
Last fetch returned code 200, OK, the current page state is ACTIVE.
Traffic Data for silikony-sk.sk
Traffic data is only available for sites with a CashRank of $15 or better, an Alexa rank better than 100,000 or PageRank of 2 or more.If you are the owner of silikony-sk.sk and you want to remove this page from the search results, just use robots.txt
Similar Sites
Silicone products and materials for producing customized molds | suppl
Today «Silikony SK» company is a big supplier of mold silicone compounds and mold polyurethanes in the whole Europe.
http://silikony-sk.sk/
- Details - Similar
SK-790 Using Guidance | Silicone products and materials for producing
Take the same amounts of both components from the container and mix them. The two components of silicone rubber must be mixed homogeneously, otherwise, it will be partly cured and solidified; Deaerate in a vacuum cupboar
http://silikony-sk.sk/en/sk790_application
- Details - Similar
Application of polyurethane for molding | Application of Molding polyu
Application of polyurethane for mold making | Processing procedure: Preparation of master-model. Master-model should be thoroughly cleaned and dried. Use release agent for porous surfaces (gypsum plaster, concrete, clay,
http://silikony-sk.sk/en/polyurehane_application
- Details - Similar
Microprimer PU for Polyurethane | Silicone products and materials for
Low Viscosity, Aliphatic, Non-Staining Polyurethane Based Primer/ Concrete Sealer, for both Porous Non-Porous Substrates DESCRIPTION
http://silikony-sk.sk/en/primer_polyurethane
- Details - Similar
More sites similar to Polyurethane for producing molds | Molding polyurethane | Silicone pro...
Find Another Website
Sponsored Results
Your Ad Here & Hundreds of Other ISEDN Engines & Directories- $3/Month or Less
Your Ad Here & Hundreds of Other ISEDN Engines & Directories- $3/Month or Less